V2200Plus
-
Specification
- Dimensions: 267*157*106 mm (10.5*6.2*4.2 in.)
- Weight: 1460g (51.5 oz.)
- Peak Current: 2200A; 500A 2S
- Battery Capacity: 16000 mAh 3.7V; 59.2Wh
- Input Port: Type-C:
- Bidirectional, PD60W; 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓3A
- Output Ports: Type-C:
- PD60W20V⎓3A,15V⎓3A,12V⎓3A,9V⎓3A,5V⎓3A
- USB1: QC18W,12V⎓1.5A,9V⎓2A,5V⎓3A
- USB2: QC18W,12V⎓1.5A,9V⎓2A,5V⎓3A
- DC: Max 16.8V⎓10A
- Clamp Cable Lengths: 200mm (7.9 in.)
- Jump Start Capacity: 8L Gas, 6L Diesel
- Protections: Reverse connection, reverse charging, short circuits, over currents, over temperatures, & over discharges
- Jump Volume: 35 Jumps On A Full Charge
Packing List
V2200Plus *1
Jump/Tester Clamps *1
USB Cable *1
Carry Case *1
Multilingual Menu *1
The V2200Plus is a 2-in-1 jump pack and battery tester that takes on the unexpected. Offering 35 jumps on a full charge, smart clamps to protect against common safety hazards, and features a 300-lumen LED light. A built-in Bluetooth module supports 12V battery tests by pairing an app with Bluetooth. This provides cranking, and battery test reports to let you replace a battery before it dies. The V2200Plus can even act as a charging brick for small devices. Take the V2200Plus everywhere you drive to be prepared for anything.

Starts All 12V Battery Vehicles
The power and quantity of jumps stored in the jump pack lets you jump most passenger vehicles on the road with ease.

Test Lead-Acid Batteries Through The App
Use the app to perform detailed battery tests before a battery needs to be replaced. Analyze a battery’s voltage, state of health, and state of charge with charging tests. Use cranking tests to monitor cranking times and cranking voltages. The testing capabilities do not stop there. Check cold cranking amps to the rated CCA, and the overall battery health status for precise knowledge of a 12V battery.

LED Flashlight
In any emergency situation, a high-power flashlight is always an asset. The V2200Plus features a 300 Lumen LED light to see in the dark and signal for help. Choose from a solid beam of light, a fast-paced strobe, or a slow SOS mode to signal for help.

Boost Dead or Damaged Batteries
Use the boost function for particularly stubborn batteries. TOPDON’s V2200Plus can start your vehicle using its BOOST FUNCTION, even if the battery has 0 voltage. Simply press and hold the BOOST button for 1 second and start your vehicle within the next 30 seconds.

Test Real-Time Voltage
Works as a digital voltmeter by graphing battery charging, discharging, and starting voltage changes.

6 Safety Features
Featuring a half-dozen safety features. The V2200Plus protects users from electrical hazards, including sparks from cable clamps touching. The tools also feature the classic ruggedness of TOPDON’s JumpSurge series. Drop, dust, and water resistance makes for a reliable tool no matter the conditions.

Power Essential Devices
Fully charge most devices and electronics within an hour! Charge smartphone, tablets, cameras, Kindles, speakers, tire inflators, and more!

Generate Reports
Permanently stores all test results and battery data. Whether you’re a professional providing service and documentation, or a meticulous car expert keeping a battery log, we know you’ll appreciate having test results when you need them.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
BT300P
Specification
- Working Voltage: @DC 9V-30V
- Display: 2.4" Color
- Cable Length: 31.5 inches
- Working Temperature: -10℃ to 55℃
- Storage Temperature: -20℃ to 75℃
- Dimension: 8.19*3.94*1.49 inches
- Weight: 16.76 oz.
- Protection: Reverse Polarity Protection
- CCA: 100-2000
- Battery Type: Flooded/AGM/GEL/EFB
- Battery Standard: CCA/CA/BCI/MCA/DIN/IEC/EN/SAE/JIS/G
Packing List
- BT300P
- User Manual
- Carrying Bag
- Printer Paper 3 Rolls
CTECHI 220 V LiFePO₄ UPS (1–3 kVA) – Tower & 2U Rack-Mount, Online Double-Conversion Battery Backup
Tornado120000
-
Specification
Electrical Specifications- Input Voltage: 90~240Vac
- Output Voltage: 11~16.8V 5-120A(adjustable), up to 1700W
- Charging Mode: Supply, Lead-Acid, LiFePO4, Custom, NORM, AGM
- Input: AWG18#, 2m
- Output: Positive AWG4#, 2.2m or 5m;Â Negative AWG4#, 2.2m or 5m
- Working Temperature: 14°F to 104°F (-10°C to 40°C)
- Storage Temperatue: -4°F to 167°F (-20°C to 75°C)
- Note: To switch the output line length, please change the settings in Output Line Settings.
- Protection: Over-temperature protection, input low voltage protection, overload protection, bad battery protection, short circuit protection, overvoltage protection, reverse connection protection, host abnormality protection.
Packing List
- Tornado120000
- 2m or 5m Battery Clamps
- USB-A to USB-B Cable
- AC Power Cable
- User Manual
- Safety Guide
Tornado4000 2023 Version
 Specification
- Input Voltage: 100-240V
- Output Voltage: 6-14.4V
- Output Current: 4A Max
- Charging Mode: 12V NORM, 12V LI, 12V REP, 12V SUP & 6V NORM
- AC Cable Length: 2m, Input AWG18#
- Charging Method: 9-Step Smart Charging
- DC Cable Length: Positive AWG14#, 1.8m; Negative AWG14#, 1.8m
- Dimension: 13*7.9*5cm (5.12*3.11*1.97 inch)
- Weight: 600g (1.32 lb)
- Protection Rating: IP65
- Applicable Battery Capacities: 5-120Ah
Packing List
- Tornado4000 *1
- Package Box *1
- SAE to O-ring terminals *1
- Battery Clamps *1
- User Manual *1
V1500
-
Specification
- Battery Capacity: 37Wh/10000mAh, 3.7V
- USB Type-A Output: 5V/3A
- DC Output: Max 16.8V 10A
- USB Type-C Input: PD18W 5V/3A, 9V/2A
- Peak Current: 1500A
- Dimensions: 196*125*92mm (7.72 x 4.92 x 3.62 inches)
- Weight: 950g (33.5 oz)
- Cable Length: Positive: AWG8#, 250 mm; Negative: AWG8#, 150 mm
- Working Temperature: -10℃ to 40℃ (14 ℉ to 104 ℉ )
- Storage Temperature: -20℃ to 75℃ (-4 ℉ to 167 ℉ )
- Protections: Reverse connection, reverse charging, short circuits, over current, over temperature, over discharge
Packing List
- V1500 Jump Starter
- Battery Clamps
- USB Cable
- User Manual
- Carrying Case
- Package Box
V2200Air
-
Specification
- Peak Current: 2200A
- Battery Capacity: 3.7V, 12000mAh, 44.4Wh
- Type-C Input: PD45W, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓2.25A
- Type-C Output: PD45W, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓2.25A
- USBA Output: 5V⎓3A
- DC Output: Max 16.8V⎓10A
- Dimensions: 265*139*70mm ( 10.4*5.5*2.8 inches)
- Weight: 1400g (3.08lb)
- Cable Length: Positive: 250mm Negative: 150mm
- Working Temperature: -10℃~55℃ (14℉~131℉)
- Storage Temperature: -20℃~55℃ (-4℉~131℉)
- Safety: Protections: Short Circuit Protection, Over Current Protection, Reverse Polarity Protection, Reverse Charge Protection, Over Temperature Protection, Over Discharge Protection
V4500 Plus
-
Specification
- Peak Current: 4500A
- Battery Capacity: 3.7V, 32000mAh; 120Wh
- Type-C Input: Bidirectional, PD100W, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓3A, 20V⎓5A
- Type-C Output: Bidirectional, PD100W, 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓3A, 20V⎓5A
- USB1 Output: QC18W, 12V⎓1.5A, 9V⎓2A, 5V⎓3A
- USB2 Output: QC18W, 12V⎓1.5A, 9V⎓2A, 5V⎓3A
- DC Output: Max 16.8V⎓10A
- Dimensions: 320*310*175mm (12.6*12.2*6.9 inches)
- Weight: 4400g (9.7lb)
- Cable Length: Positive: 380mm Negative: 380mm
- Working Temperature: -10℃~55℃ (14℉~131℉)
- Storage Temperature: -20℃~55℃ (-4℉~131℉)
- Safety: Reverse-connections, Reverse-charging, Short circuits, Over-currents, Overheating, Over-discharges, Overload , Voltage fluctuations, Low temperature, Low voltage
YATO 18V-3AH BATTERY
- Brand: YATO
- Model: YT-828462
- Battery Type: Lithium-ion
- Voltage: 18V
- 3.0Ah capacity
- 90-120 minutes charging time
- Lightweight and portable for ease of use
- Impact-resistant, rugged housing
- Overcharge, overheat, and short-circuit protection
- Fully compatible with all YATO 18V cordless tools
| Weight | 10 kg |
|---|---|
| brand | YATO |

Reviews
There are no reviews yet.